NRG Kits are the Ultimate Low Cost Source for Surveillance FM Transmitter Bugs!

Kit Building Advice - Surveillance FM Transmitter Bug Example

Here is a good and bad example of finished transmitter kits by home constructors. It's fun to look at so enjoy yourself with this one! Remember, allow yourself some time and read the instructions fully!

Tip: To make good soldered connections on the printed circuit board, make sure your soldering iron bit is clean and tinned. Apply solder into the work as you heat up the joint with the soldering iron. Never carry the solder on the end of the iron to the work, because the flux (within the solder) will deactivated and you will be left with a dry joint!

The Surveillance FM Transmitter kit will  hear the faintest whisper, click here for details!